This product employs a twin mixer system, and supports manufacturing application with the capacity to process a maximum 1L of materials. It is equipped with a vacuum function in order to achieve deaeration at the submicron level, thus it is possible to process uniform mixing and dispersion as well as deaeration at the same time. It has two deaeration modes as standard features: one is vacuum deaeration mode which combines 400G centrifugal force and vacuum, and the other is Non Vacuum deaeration mode which utilizes powerful centrifugal force of maximum 670G. This enables high precision deaeration even with materials that contain a volatile component that is not suitable for vacuum deaeration. Furthermore, time to reach vacuum is significantly reduced by adopting our unique in-cup-holder vacuum pressure reduction system that minimizes the vacuum volume.
|Unit Dimensions/ Unit weight||: H900×W660×D670（mm)Approx. 220kg|
*1：Total mass to mount on the cup holder, including materials, containers, and adapters.
*2：Contact us because the actual volume of mixing may vary depending on the containers, materials, and conditions.
|: 750ml resin container|
|Power Supply||: Voltage: Three-phaseAC 220 V ± 10 %, 50/60 HzPower consumption:Approx. 120 VA (standby)Max 4400 VA (operation)|
|Accessories||: Instruction Manual × 1, Power cable ×1,HDPE 750 ml container × 6 (O-ring× 4,Inner lid without hole × 2,Outer lid without hole × 2,Inner lid with hole × 4,and Outer lid with hole × 4)550 ml container × 6 (Adapter × 2 and all the above lids) Phillips screwdriver × 1,Hexagon wrench × 1, Pliers × 1,Bolt × 2, Vacuum pump oil,Waste oil receiver × 1, Funnel × 1|