Programmable Syringe Pump

Programmable syringe pump MiNi SY-04 was one of our patent products which focuses on precisely transferring fluids from microliters to milliliters with the support of 0.9° stepper motor, lead screw and high precision borosilicate cylinder, small footprint and wide communication interfaces make this precision syringe pump preferred a lot by modern small-scaled equipment.

Specification of Programmable Syringe Pump

Model No.	MiNi SY-04
Accuracy	≤1% @100% stroke
Precision (Repeatability)	3‰ – 7‰ @100% stroke
Pressure rating	0-1.0Mpa (air)	0-1.2Mpa (water)
Service life	3 million times no leakage (test media: water ; 1 stoke = once)
Innitial position detection	Photosensor detect original piston position
Rated stroke (control steps)	5ml	10ml	20ml
	30mm (12000 steps)	24.08mm (9632 steps)	24mm (9600 steps)
Syringe ID	14.55mm	23mm	32mm
Motor speed	300rpm	300rpm	250pm
Linear speed	0.017mm/s – 5mm/s
Running time (stroke)	6s – 1765s	4.8s – 1416s	5.76s – 1412s
Resolution	0.0025mm/0.4154μL	0.0025mm/1.0381μL	0.0025mm/2.0833μL
Actuator	KSS Ball screw (lead 1mm)
Wetted material	Borosilicate glass, PTFE
Pressure rating	Positive air pressure 0-1.0Mpa / Negative air pressure 0-0.05Mpa (during test)
Connection	1/4-28UNF
Communication	RS232/RS485/CAN
Baud rate	RS232/RS485: 9600dps, 19200dps, 38400dps, 57600dps, 115200dps CAN: 100Kbps, 200Kbps, 500Kbps, 1Mbps
Address & Parameter setting	Communication interface
Power supply	DC24V/1.5A
Max Power	15W
Operating temperature	5℃ – 55℃
Operating humidity	< 80% non-condensing
Dimension (LWH)	4242191mm (without driver) 4242206.2mm (with driver)
Net Weight	0.72kg